XGFR 8-8-4 Compact Juice Filling Machine for PET Bottles
Navan XGFR 8-8-4 juice filling machine: 3-in-1 rinsing, micro-negative pressure filling and capping for PET bottles, up to 3,000 BPH. Get a quote!
Model: XGFR 8-8-4
Capacity: 2,500 – 3,000 BPH
Bottle Size: 100-2000ml
Bottle Type: PET Bottles
* We will reply to you within a maximum of 24 hours
3-in-1 Monoblock Design
Rinsing, micro-negative pressure filling and capping share one compact frame, a space-saving small juice filling machine for tight workshops.
Micro-Negative Pressure Filling
Micro-negative pressure filling gives clean, accurate bottling, so this PET bottle juice filling machine holds uniform fill levels.
PLC Touch Screen Control
Full touch-screen PLC control makes speed regulation and monitoring easy, while quick-change parts switch bottle sizes with little downtime.
Hygienic & Energy Saving
SUS304 contact parts and a 1.9 kW main motor keep cleaning and energy costs low, helping a small juice line reach payback sooner.
Technical Specifications
| Parameter | XGFR 24-24-8 Juice Packing Machine |
|---|---|
| Monoblock Configuration | 8 Rinsing Heads / 8 Filling Valves / 4 Capping Heads |
| Filling Type | Micro-Negative Pressure Filling |
| Production Capacity (500ml) | 2,500 – 3,000 Bottles/Hour (BPH) |
| Applicable Bottle Volume | 100ml – 2000ml (Option up to 2500ml) |
| Applicable Bottle Diameter | Φ50mm – Φ100mm |
| Applicable Bottle Height | H = 150mm – 340mm |
| Cap Type & Neck Spec | Plastic Screw Cap (Φ20mm – Φ50mm) |
| Main Motor Power | 1.9 kW |
| Power Supply Standard | 220V ~ 480V, 3-Phase, 50Hz / 60Hz (Customizable) |
| Machine Dimensions (L W H) | 1.9m × 1.42m × 2m |
| Machine Weight | 1,500 kg |
Juice Filling Machine Detail Display
Rinsing Station
Neck grippers hold each PET bottle and flip it 180°, so the 8 rinsing heads flush the inside of the bottle clean before it reaches the filling valves.
Filling Station
8 micro-negative pressure filling valves deliver clean, accurate juice and tea filling. Swap change parts to fit other bottle volumes.
Capping Station
4 capping heads tighten plastic screw caps firmly without cap damage. Swap capping molds to fit different bottle necks and cap styles.
Bottling Line
We are committed to turnkey projects for filling production lines. If you need any machines on the production line, you can contact us
Frequently Asked Questions
Replace the change parts on the filling valves and swap the capping molds, then adjust the station heights. The rinsing heads clean the inside of any bottle in the supported range.
No. This model is built for non-carbonated drinks such as juice and tea. For soda and sparkling water, choose our isobaric XGFD series.
It gives clean, accurate and efficient bottling of non-carbonated drinks, with uniform fill levels from bottle to bottle.
We provide a 1-year guarantee, free lifelong technical support and a year’s supply of easy-wear spare parts. Production normally takes 30–60 days depending on configuration.
Yes. We deliver turnkey projects from A to Z, including a PET bottle blow molding machine, labeling and packing. See our bottle juice and tea production line solution.