XGFR 24-24-8 High-Speed Juice Packing Machine for PET Bottles
This juice packing machine suits mid-size to large juice and tea plants and established brands upgrading their PET bottle lines.
Model: XGFR 24-24-8
Capacity: 10,000 – 12,000 BPH
Bottle Size: 100-2000ml
Bottle Type: PET Bottles
* We will reply to you within a maximum of 24 hours
3-in-1 Monoblock Design
Rinsing, micro-negative pressure filling and capping share one frame, a compact core for any juice filling line with fewer bottle transfers.
Micro-Negative Pressure Filling
Micro-negative pressure filling gives clean, accurate bottling, so this fruit juice packaging machine holds uniform levels at high speed.
PLC Touch Screen Control
Full touch-screen PLC control eases speed regulation and monitoring, while quick-change parts switch bottle sizes with little downtime.
Hygienic & Energy Saving
SUS304 contact parts and a 4.8 kW main motor keep cleaning and energy costs low, giving large juice lines a faster return on investment.
Technical Specifications
| Parameter | XGFR 24-24-8 Juice Packing Machine |
|---|---|
| Monoblock Configuration | 24 Rinsing Heads / 24 Filling Valves / 8 Capping Heads |
| Filling Type | Micro-Negative Pressure Filling |
| Production Capacity (500ml) | 10,000 – 12,000 Bottles/Hour (BPH) |
| Applicable Bottle Volume | 100ml – 2000ml (Option up to 2500ml) |
| Applicable Bottle Diameter | Φ50mm – Φ100mm |
| Applicable Bottle Height | H = 150mm – 340mm |
| Cap Type & Neck Spec | Plastic Screw Cap (Φ20mm – Φ50mm) |
| Main Motor Power | 4.8 kW |
| Power Supply Standard | 220V ~ 480V, 3-Phase, 50Hz / 60Hz (Customizable) |
| Machine Dimensions (L W H) | 2.78m × 2.2m × 2.2m |
| Machine Weight | 4,500 kg |
Juice Packing Machine Detail Display
Rinsing Station
Neck grippers hold each PET bottle and flip it 180°, so the 24 rinsing heads flush the inside of the bottle clean before it reaches the filling valves.
Filling Station
24 micro-negative pressure filling valves deliver clean, accurate juice and tea filling. Swap change parts to fit other bottle volumes.
Capping Station
8 capping heads tighten plastic screw caps firmly without cap damage. Swap capping molds to fit different bottle necks and cap styles.
Bottling Line
We are committed to turnkey projects for filling production lines. If you need any machines on the production line, you can contact us
Frequently Asked Questions
Replace the change parts on the filling valves and swap the capping molds, then adjust the station heights. The rinsing heads clean the inside of any bottle in the supported range.
No. The rated 10,000–12,000 BPH is based on 500 ml bottles. Actual output depends on bottle volume and neck design, so send us your bottle drawing for a confirmed figure.
Yes. We supply beverage processing equipment for blending water, sugar, juice and additives, and we design the layout so it feeds this filler directly.
We provide a 1-year guarantee, free lifelong technical support and a year’s supply of easy-wear spare parts. Each machine is tested non-stop for 8+ hours, and production takes 30–60 days.
Yes. We deliver turnkey projects from A to Z, from blow molding to labeling, packing and palletizing. See our bottle juice and tea production line solution.